{ "translations": {
    "Daemon config not found" : "Konfigurasi daemon tidak ditemukan",
    "Error starting install of ExApp" : "Kesalahan saat memulai instalasi ExApp",
    "ExApp failed to register, check the NC logs" : "ExApp gagal terdaftar, periksa log NC",
    "ExApp not found, failed to get status" : "ExApp tidak ditemukan, gagal mendapatkan status",
    "Error adding Docker registry" : "Kesalahan saat menambahkan registry Docker",
    "Error removing Docker registry" : "Kesalahan saat menghapus registry Docker",
    "This app is not installed from the AppStore. No extra information available. Only enable/disable and remove actions are allowed." : "Aplikasi ini tidak diinstal dari AppStore. Tidak ada informasi tambahan tersedia. Hanya tindakan aktifkan/nonaktifkan dan hapus yang diizinkan.",
    "Could not perform installation of ExApp" : "Tidak dapat melakukan instalasi ExApp",
    "Failed to enable ExApp" : "Gagal mengaktifkan ExApp",
    "Failed to disable ExApp" : "Gagal menonaktifkan ExApp",
    "Could not update ExApp" : "Tidak dapat memperbarui ExApp",
    "Error starting update of ExApp" : "Kesalahan saat memulai pembaruan ExApp",
    "Could not perform update of ExApp" : "Tidak dapat melakukan pembaruan ExApp",
    "ExApp not found, failed to get logs" : "ExApp tidak ditemukan, gagal mendapatkan log",
    "Failed to get container logs. Note: Downloading Docker container works only for containers with the json-file or journald logging driver. Error: %s" : "Gagal mendapatkan log kontainer. Catatan: Mengunduh kontainer Docker hanya berfungsi untuk kontainer dengan driver logging json-file atau journald. Kesalahan: %s",
    "ExApp not found, failed to get deploy options" : "ExApp tidak ditemukan, gagal mendapatkan opsi deployment",
    "AppAPI authentication failed" : "Autentikasi AppAPI gagal",
    "AppAPI ExApp notifier" : "Notifier ExApp AppAPI",
    "AppAPI" : "AppAPI",
    "AI Integration Team" : "Tim Integrasi AI",
    "ExApps Settings" : "Pengaturan ExApps",
    "AppAPI deploy daemon" : "Daemon deploy AppAPI",
    "AppAPI default deploy daemon is not set. Please register a default deploy daemon in the settings to install External Apps (Ex-Apps)." : "Daemon deploy default AppAPI belum disetel. Silakan daftarkan daemon deploy default di pengaturan untuk menginstal Aplikasi Eksternal (Ex-App).",
    "AppAPI default deploy daemon \"%s\" is not accessible. Please check the daemon configuration." : "Daemon deploy default AppAPI \"%s\" tidak dapat diakses. Silakan periksa konfigurasi daemon.",
    "The AppAPI default deploy daemon is not using HaRP. Please consider switching to HaRP for better performance." : "Daemon deploy default AppAPI tidak menggunakan HaRP. Harap pertimbangkan untuk beralih ke HaRP untuk kinerja yang lebih baik.",
    "AppAPI HaRP version check" : "Pemeriksaan versi HaRP AppAPI",
    "Could not retrieve HaRP version from daemon \"%s\"" : "Tidak dapat mengambil versi HaRP dari daemon \"%s\"",
    "HaRP version for daemon \"%s\" is \"%s\", which is too old. The minimum required version is \"%s\". Please update the daemon to the latest version." : "Versi HaRP untuk daemon \"%s\" adalah \"%s\", yang terlalu lama. Versi minimum yang diperlukan adalah \"%s\". Silakan perbarui daemon ke versi terbaru.",
    "Failed to check HaRP version for daemon \"%s\": %s" : "Gagal memeriksa versi HaRP untuk daemon \"%s\": %s",
    "Nextcloud AppAPI" : "Nextcloud AppAPI",
    "### What is AppAPI?\n\nAppAPI is the Nextcloud component that enables **External Apps (ExApps)**.\nExApps are apps whose backend runs **outside** the Nextcloud PHP process (usually as a Docker container), while still integrating with your Nextcloud users, permissions and web UI.\n\n### Do I need it?\n\nNo. If you do not plan to install External Apps, you can disable AppAPI.\n\nIf AppAPI is enabled without a configured Deploy Daemon, Nextcloud will show the info message:\n\n> \"AppAPI default deploy daemon is not set …\"\n\nThat warning means: \"External Apps are not configured yet\".\n\nYou can either disable AppAPI, or configure a Deploy Daemon (see below).\n\n### How do External Apps get deployed?\n\nA **Deploy Daemon** is the service Nextcloud talks to in order to install, start, stop and reach ExApps.\n\nTwo options are available:\n\n- **HaRP** (recommended for Nextcloud 32+) — a high-performance reverse proxy with FRP tunneling\n- **Docker Socket Proxy** (legacy) — scheduled for removal in Nextcloud 35\n\nSee the [admin documentation](https://docs.nextcloud.com/server/latest/admin_manual/exapps_management/DeployConfigurations.html) for setup instructions." : "### Apa itu AppAPI?\n\nAppAPI adalah komponen Nextcloud yang mengaktifkan **Aplikasi Eksternal (ExApps)**.\nExApps adalah aplikasi yang backend-nya berjalan **di luar** proses PHP Nextcloud (biasanya sebagai kontainer Docker), sambil tetap terintegrasi dengan pengguna, izin, dan UI web Nextcloud.\n\n### Apakah saya membutuhkannya?\n\nTidak. Jika Anda tidak berencana menginstal Aplikasi Eksternal, Anda dapat menonaktifkan AppAPI.\n\nJika AppAPI diaktifkan tanpa Daemon Deploy yang dikonfigurasi, Nextcloud akan menampilkan pesan informasi:\n\n> \"Daemon deploy default AppAPI belum disetel …\"\n\nPeringatan itu berarti: \"Aplikasi Eksternal belum dikonfigurasi\".\n\nAnda dapat menonaktifkan AppAPI, atau mengonfigurasi Daemon Deploy (lihat di bawah).\n\n### Bagaimana Aplikasi Eksternal dideploy?\n\n**Daemon Deploy** adalah layanan yang dihubungi Nextcloud untuk menginstal, memulai, menghentikan, dan menjangkau ExApps.\n\nDua opsi tersedia:\n\n- **HaRP** (direkomendasikan untuk Nextcloud 32+) — reverse proxy berperforma tinggi dengan tunneling FRP\n- **Docker Socket Proxy** (lama) — dijadwalkan untuk dihapus di Nextcloud 35\n\nLihat [dokumentasi admin](https://docs.nextcloud.com/server/latest/admin_manual/exapps_management/DeployConfigurations.html) untuk instruksi penyiapan.",
    "External Apps management" : "Pengelolaan Aplikasi Eksternal",
    "Admin options saved" : "Opsi admin disimpan",
    "Failed to save admin options" : "Gagal menyimpan opsi admin",
    "The AppAPI Project is an exciting initiative that aims to revolutionize the way applications are developed for Nextcloud through the use of docker containers. Allowing for greater programming language choice and allowing computationally expensive tasks to be offloaded to a different server." : "Proyek AppAPI adalah inisiatif menarik yang bertujuan merevolusi cara aplikasi dikembangkan untuk Nextcloud melalui penggunaan kontainer Docker. Ini memungkinkan pilihan bahasa pemrograman yang lebih luas dan memungkinkan tugas yang memerlukan komputasi mahal dialihkan ke server lain.",
    "Deploy daemons" : "Daemon deploy",
    "A deploy daemon (DaemonConfig) is an ExApps orchestration daemon." : "Daemon deploy (DaemonConfig) adalah daemon orkestrasi ExApps.",
    "Deploy daemons. A deploy daemon (DaemonConfig) is an ExApps orchestration daemon." : "Daemon deploy. Daemon deploy (DaemonConfig) adalah daemon orkestrasi ExApps.",
    "Default deploy daemon is not accessible. Please check its configuration" : "Daemon deploy default tidak dapat diakses. Silakan periksa konfigurasinya",
    "ExApp init timeout (minutes)" : "Timeout inisialisasi ExApp (menit)",
    "ExApp initialization process timeout after which AppAPI will mark it as failed" : "Batas waktu proses inisialisasi ExApp yang setelahnya AppAPI akan menandainya sebagai gagal",
    "ExApp init timeout" : "Timeout inisialisasi ExApp",
    "ExApp container restart policy" : "Kebijakan restart kontainer ExApp",
    "Choose the container restart policy, e.g. 'always' to ensure ExApps will be running after a daemon server reboot" : "Pilih kebijakan restart kontainer, misalnya 'always' untuk memastikan ExApps akan berjalan setelah reboot server daemon",
    "This settings changes are effective only for newly created containers" : "Perubahan pengaturan ini hanya berlaku untuk kontainer yang baru dibuat",
    "Deploy daemon deletion confirmation" : "Konfirmasi penghapusan daemon deploy",
    "Are you sure you want delete the \"{name}\" deploy daemon?" : "Apakah Anda yakin ingin menghapus daemon deploy \"{name}\"?",
    "Remove all ExApps installed on this daemon" : "Hapus semua ExApp yang diinstal pada daemon ini",
    "Cancel" : "Batal",
    "Delete" : "Hapus",
    "A \"manual-install\" deploy daemon cannot be set as default" : "Daemon deploy \"manual-install\" tidak dapat ditetapkan sebagai default",
    "Failed to save admin settings. Check the logs" : "Gagal menyimpan pengaturan admin. Periksa log",
    "Password confirmation failed" : "Konfirmasi kata sandi gagal",
    "Default" : "Default",
    "Set as default" : "Tetapkan sebagai default",
    "Test deploy" : "Uji deploy",
    "Docker registries" : "Registry Docker",
    "Edit" : "Sunting",
    "Daemon connection successful" : "Koneksi daemon berhasil",
    "Failed to connect to the daemon. Check the logs" : "Gagal terhubung ke daemon. Periksa log",
    "Failed to check connection to the daemon. Check the logs" : "Gagal memeriksa koneksi ke daemon. Periksa log",
    "Unlimited" : "Tak terbatas",
    "{size} GiB" : "{size} GiB",
    "{size} MiB" : "{size} MiB",
    "_{n} CPU_::_{n} CPUs_" : ["{n} CPU"],
    "Deploy daemon configuration" : "Konfigurasi daemon deploy",
    "Deploy daemon configuration details" : "Detail konfigurasi daemon deploy",
    "Deploy daemon" : "Daemon deploy",
    "Default daemon. ExApps will be installed on it" : "Daemon default. ExApp akan diinstal di daemon ini",
    "The \"Manual install\" daemon is usually used for development. It cannot be set as the default daemon." : "Daemon \"Manual install\" biasanya digunakan untuk pengembangan. Daemon ini tidak dapat ditetapkan sebagai daemon default.",
    "ExApps installed" : "ExApp terinstal",
    "Name" : "Nama",
    "Protocol" : "Protokol",
    "Host" : "Host",
    "ExApp direct communication (FRP disabled)" : "Komunikasi langsung ExApp (FRP dinonaktifkan)",
    "Deploy options" : "Opsi deploy",
    "Docker network" : "Jaringan Docker",
    "Nextcloud URL" : "URL Nextcloud",
    "HaProxy password" : "Kata sandi HaProxy",
    "GPU support" : "Dukungan GPU",
    "Computation device" : "Perangkat komputasi",
    "Memory limit" : "Batas memori",
    "CPU limit" : "Batas CPU",
    "Additional options" : "Opsi tambahan",
    "Check connection" : "Periksa koneksi",
    "Registered Deploy daemons list" : "Daftar Deploy daemon yang terdaftar",
    "No Deploy daemons are registered" : "Tidak ada daemon deploy yang terdaftar",
    "Register a custom one or configure one from the available templates" : "Daftarkan daemon kustom atau konfigurasikan salah satu dari templat yang tersedia",
    "Register daemon" : "Daftarkan daemon",
    "Register ExApp in Nextcloud" : "Daftarkan ExApp di Nextcloud",
    "Check if the ExApp is registered in Nextcloud before deployment" : "Periksa apakah ExApp terdaftar di Nextcloud sebelum deployment",
    "Image pull" : "Penarikan image",
    "Check if the image is successfully pulled" : "Periksa apakah image berhasil ditarik",
    "Container started" : "Kontainer dimulai",
    "Check if the image successfully pulled and container is created and started" : "Periksa apakah image berhasil ditarik dan kontainer dibuat serta dimulai",
    "Heartbeat" : "Heartbeat",
    "Check for the heartbeat is finished and healthy" : "Pemeriksaan heartbeat selesai dan dalam kondisi sehat",
    "Init step" : "Langkah init",
    "Wait for initialization step to finish" : "Tunggu hingga langkah inisialisasi selesai",
    "Enabled" : "Diaktifkan",
    "Check if ExApp successfully handled the enabled event and registered all stuff properly" : "Periksa apakah ExApp berhasil menangani event enabled dan mendaftarkan semua hal dengan benar",
    "Only if ExApp container is preset" : "Hanya jika kontainer ExApp telah tersedia",
    "Deploy test passed successfully!" : "Uji deploy berhasil!",
    "Deploy test failed at step \"{step}\"" : "Uji deploy gagal pada langkah \"{step}\"",
    "AppAPI will try to install small skeleton ExApp to check that the daemon is configured correctly and the deployment steps are successful." : "AppAPI akan mencoba menginstal ExApp kerangka kecil untuk memeriksa bahwa daemon dikonfigurasi dengan benar dan langkah-langkah deployment berhasil.",
    "The following deploy test checks must succeed:" : "Pemeriksaan uji deploy berikut harus berhasil:",
    "More information" : "Informasi lebih lanjut",
    "Download ExApp logs" : "Unduh log ExApp",
    "Remove the test ExApp" : "Hapus ExApp uji",
    "Start the deploy test" : "Mulai uji deploy",
    "Stop the deploy test" : "Hentikan uji deploy",
    "The test ExApp is unregistered and its container is removed on \"Stop the deploy test\"" : "ExApp uji akan dibatalkan pendaftarannya dan kontainernya dihapus saat \"Hentikan uji deploy\"",
    "Please enter a registry domain" : "Silakan masukkan domain registry",
    "\"From\" cannot be \"local\"" : "\"From\" tidak boleh \"local\"",
    "This registry mapping already exists" : "Pemetaan registry ini sudah ada",
    "\"From\" and \"To\" cannot be the same" : "\"From\" dan \"To\" tidak boleh sama",
    "Docker registry mapping added" : "Pemetaan registry Docker ditambahkan",
    "Error adding Docker registry mapping" : "Kesalahan saat menambahkan pemetaan registry Docker",
    "Docker registry mapping removed" : "Pemetaan registry Docker dihapus",
    "Error removing Docker registry mapping" : "Kesalahan saat menghapus pemetaan registry Docker",
    "Override Docker registries" : "Timpa registry Docker",
    "Configure Docker registry override mappings for the selected daemon." : "Konfigurasikan pemetaan penimpaan registry Docker untuk daemon yang dipilih.",
    "The matching source registry in ExApp info.xml will be overwritten during deployment (image pull step)." : "Registry sumber yang cocok dalam info.xml ExApp akan ditimpa selama deployment (langkah penarikan image).",
    "This is useful if you want to use a custom Docker registry, for example, to use a private Docker registry, or to use a different Docker registry for testing." : "Ini berguna jika Anda ingin menggunakan registry Docker kustom, misalnya untuk menggunakan registry Docker privat, atau menggunakan registry Docker yang berbeda untuk pengujian.",
    "Image pull will be skipped" : "Penarikan image akan dilewati",
    "Remove" : "Hapus",
    "No custom Docker registries are registered" : "Tidak ada registry Docker kustom yang terdaftar",
    "Add registry override mapping" : "Tambahkan pemetaan penimpaan registry",
    "From" : "Dari",
    "registry URL (e.g. ghcr.io)" : "URL registry (misalnya ghcr.io)",
    "To" : "Hingga",
    "registry URL (e.g. docker.io)" : "URL registry (misalnya docker.io)",
    "Add" : "Tambah",
    "Hostname used by Nextcloud to access the ExApps" : "Nama host yang digunakan oleh Nextcloud untuk mengakses ExApps",
    "The hostname (and port) at which the {name} is available. This does not need to be a public host, just a host accessible by the Nextcloud server, e.g. {host}." : "Nama host (dan port) tempat {name} tersedia. Ini tidak harus berupa host publik, cukup host yang dapat diakses oleh server Nextcloud, misalnya {host}.",
    "The hostname (and port) or path at which the {name} is available. This does not need to be a public host, just a host accessible by the Nextcloud server. It can also be the path to the Docker socket. (e.g. nextcloud-appapi-dsp:2375, /var/run/docker.sock)" : "Nama host (dan port) atau path tempat {name} tersedia. Ini tidak harus berupa host publik, cukup host yang dapat diakses oleh server Nextcloud. Ini juga dapat berupa path ke soket Docker. (misalnya nextcloud-appapi-dsp:2375, /var/run/docker.sock)",
    "A daemon with this name already exists" : "Daemon dengan nama ini sudah ada",
    "The secret key for the HaRP container communication (HP_SHARED_KEY)." : "Kunci rahasia untuk komunikasi kontainer HaRP (HP_SHARED_KEY).",
    "AppAPI Docker Socket Proxy authentication password" : "Kata sandi autentikasi AppAPI Docker Socket Proxy",
    "Changes are only effective for newly installed ExApps. For existing ExApps, the Docker containers should be recreated to apply the new settings values." : "Perubahan hanya berlaku untuk ExApp yang baru diinstal. Untuk ExApp yang sudah ada, kontainer Docker harus dibuat ulang agar nilai pengaturan baru diterapkan.",
    "The Docker network that the deployed ExApps will use." : "Jaringan Docker yang akan digunakan ExApp yang dideploy.",
    "The URL should start with http:// or https://" : "URL harus diawali dengan http:// atau https://",
    "For a HTTPS daemon, the Nextcloud URL should be HTTPS" : "Untuk daemon HTTPS, URL Nextcloud harus HTTPS",
    "All available GPU devices on the daemon host need to be enabled in ExApp containers by Docker." : "Semua perangkat GPU yang tersedia di host daemon perlu diaktifkan pada kontainer ExApp oleh Docker.",
    "DaemonConfig successfully registered" : "DaemonConfig berhasil didaftarkan",
    "Failed to register DaemonConfig. Check the logs" : "Gagal mendaftarkan DaemonConfig. Periksa log",
    "DaemonConfig successfully updated" : "DaemonConfig berhasil diperbarui",
    "Failed to update DaemonConfig. Check the logs" : "Gagal memperbarui DaemonConfig. Periksa log",
    "Failed to connect to Daemon. Check the logs" : "Gagal terhubung ke Daemon. Periksa log",
    "Failed to check connection to Daemon. Check the logs" : "Gagal memeriksa koneksi ke Daemon. Periksa log",
    "Edit the deploy daemon" : "Edit daemon deploy",
    "Register a new deploy daemon" : "Daftarkan daemon deploy baru",
    "Daemon configuration template" : "Templat konfigurasi daemon",
    "Select a daemon configuration template" : "Pilih templat konfigurasi daemon",
    "Daemon registration form" : "Formulir pendaftaran daemon",
    "Unique deploy daemon name" : "Nama daemon deploy yang unik",
    "Unique deploy Daemon name" : "Nama Daemon deploy yang unik",
    "Display name" : "Nama tampilan",
    "Deployment method" : "Metode deployment",
    "Select the daemon deploy method" : "Pilih metode deploy daemon",
    "HaRP host" : "Host HaRP",
    "Daemon host" : "Host daemon",
    "HaRP shared key" : "Kunci bersama HaRP",
    "The password must be at least 12 characters long" : "Kata sandi harus terdiri dari minimal 12 karakter",
    "Set this daemon as the default one" : "Tetapkan daemon ini sebagai daemon default",
    "Set as the default daemon" : "Tetapkan sebagai daemon default",
    "Enable HTTPS" : "Aktifkan HTTPS",
    "Show deploy options" : "Tampilkan opsi deploy",
    "Hide deploy options" : "Sembunyikan opsi deploy",
    "Enable HaRP" : "Aktifkan HaRP",
    "FRP server address" : "Alamat server FRP",
    "The address (host:port) of the FRP server that should be reachable by the ExApp in the network defined in the 'Docker network' section." : "Alamat (host:port) server FRP yang harus dapat dijangkau oleh ExApp di jaringan yang ditentukan pada bagian 'Jaringan Docker'.",
    "Docker socket proxy port" : "Port proxy soket Docker",
    "The port in HaRP which the Docker socket proxy connects to. This should be exposed but for the in-built one, it is not required to be exposed or changed." : "Port di HaRP tempat proxy soket Docker terhubung. Port ini harus diekspos, tetapi untuk yang bawaan, tidak perlu diekspos atau diubah.",
    "Disable FRP" : "Nonaktifkan FRP",
    "Flag for advanced setups only. Disables the FRP tunnel between ExApps and HaRP." : "Penanda hanya untuk penyiapan lanjutan. Menonaktifkan tunnel FRP antara ExApps dan HaRP.",
    "Docker network for ex-app deployment must be defined" : "Jaringan Docker untuk deployment ex-app harus didefinisikan",
    "Compute device" : "Perangkat komputasi",
    "Memory limit (in MiB)" : "Batas memori (dalam MiB)",
    "Must be a positive integer" : "Harus berupa bilangan bulat positif",
    "Maximum amount of memory that the ExApp container can use in mebibytes" : "Jumlah maksimum memori yang dapat digunakan kontainer ExApp dalam mebibyte",
    "CPU limit as decimal value" : "Batas CPU sebagai nilai desimal",
    "Must be a positive number" : "Harus berupa angka positif",
    "Maximum number of CPU cores that the ExApp container can use (e.g. 0.5 for half a core, 2 for two cores)" : "Jumlah maksimum core CPU yang dapat digunakan kontainer ExApp (misalnya 0.5 untuk setengah core, 2 untuk dua core)",
    "Add additional option" : "Tambahkan opsi tambahan",
    "Option key (unique)" : "Kunci opsi (unik)",
    "Option key (unique, e.g. my_key)" : "Kunci opsi (unik, misalnya my_key)",
    "Option key is required" : "Kunci opsi wajib diisi",
    "Option value" : "Nilai opsi",
    "Option value is required" : "Nilai opsi wajib diisi",
    "Confirm" : "Konfirmasi",
    "Save" : "Simpan",
    "Register" : "Daftar",
    "External Apps" : "Aplikasi Eksternal",
    "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n### Bundled App\n\n**Starting with Nextcloud 30.0.1, this application is included in the default Nextcloud package.**\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*" : "### Tingkatkan Nextcloud Anda dengan AppAPI dan aplikasi yang dirancang khusus.\n\n\nAppAPI adalah proyek dalam ekosistem Nextcloud yang dirancang untuk merampingkan dan meningkatkan proses\npengembangan, deployment, dan pengelolaan aplikasi.\n\nAppAPI memperkenalkan metodologi baru yang memungkinkan pengembang membuat\naplikasi menggunakan berbagai bahasa pemrograman, tidak terbatas pada PHP, yang secara tradisional digunakan dalam pengembangan Nextcloud.\n\n### Aplikasi Bundel\n\n**Mulai Nextcloud 30.0.1, aplikasi ini disertakan dalam paket Nextcloud default.**\n\n### Dukungan\n\nKami menghargai dukungan apa pun untuk proyek ini:\n\n- ⭐ Beri bintang pekerjaan kami di GitHub\n- ❗ Buat Issue atau permintaan fitur\n- 💁 Selesaikan Issue dan buat Pull Request\n- 🧑‍💻 Kembangkan aplikasi Anda sendiri menggunakan AppAPI\n\nKami sungguh antusias dengan masa depan proyek AppAPI dan potensinya untuk mentransformasi\ncara aplikasi dikembangkan dan dialami dalam Nextcloud.\n\nSaat kami memulai perjalanan ini, kami mengundang Anda dengan hangat - para pengembang, pemikir, kreator, dan visioner -\nuntuk bergabung bersama kami dalam membentuk lanskap aplikasi yang lebih serbaguna, stabil, dan aman.\n\n*Wawasan, saran, dan kontribusi Anda sangat berharga bagi kami.*",
    "The AppAPI Project is an exciting initiative that aims to revolutionize the way applications are developed for Nextcloud." : "Proyek AppAPI adalah inisiatif menarik yang bertujuan merevolusi cara aplikasi dikembangkan untuk Nextcloud.",
    "Deploy Daemons" : "Daemon Deploy",
    "Deploy Daemon (DaemonConfig) is an ExApps orchestration daemon." : "Daemon Deploy (DaemonConfig) adalah daemon orkestrasi ExApps.",
    "Deploy Daemons. Deploy Daemon (DaemonConfig) is an ExApps orchestration daemon." : "Daemon Deploy. Daemon Deploy (DaemonConfig) adalah daemon orkestrasi ExApps.",
    "Default Deploy Daemon is not accessible. Please verify its configuration" : "Daemon Deploy default tidak dapat diakses. Silakan verifikasi konfigurasinya",
    "Specify container restart policy, e.g. 'always' to ensure ExApp running after daemon server reboot" : "Tentukan kebijakan restart kontainer, misalnya 'always' untuk memastikan ExApp berjalan setelah reboot server daemon",
    "This settings changes are reflected only for newly created containers" : "Perubahan pengaturan ini hanya tercermin untuk kontainer yang baru dibuat",
    "{license}-licensed" : "{license}-dilisensikan",
    "Update to {version}" : "Perbarui ke {version}",
    "Delete data on remove" : "Hapus data saat penghapusan",
    "This app has no minimum Nextcloud version assigned. This will be an error in the future." : "Aplikasi ini tidak mempunyai versi minimum Nextcloud yang ditetapkan. Di masa depan nanti ini akan menjadi kesalahan.",
    "This app has no maximum Nextcloud version assigned. This will be an error in the future." : "Aplikasi ini tidak mempunyai versi maksimum Nextcloud yang ditetapkan. Di masa depan nanti ini akan menjadi kesalahan.",
    "This app cannot be installed because the following dependencies are not fulfilled:" : "Apl ini tidak dapat diinstal karena ketergantungan berikut belum terpenuhi:",
    "View in store" : "Lihat di toko",
    "Visit website" : "Kunjungi laman web",
    "Report a bug" : "Laporkan kerusakan",
    "User documentation" : "Dokumentasi pengguna",
    "Admin documentation" : "Dokumentasi admin",
    "Developer documentation" : "Dokumentasi pengembang",
    "This app is not registered in AppStore. No extra information available. Only enable/disable and remove actions are allowed." : "Aplikasi ini tidak terdaftar di AppStore. Tidak ada informasi tambahan tersedia. Hanya tindakan aktifkan/nonaktifkan dan hapus yang diizinkan.",
    "This app is supported via your current Nextcloud subscription." : "Aplikasi ini didukung dengan langganan Nextcloud Anda saat ini.",
    "Supported" : "Didukung",
    "Featured apps are developed by and within the community. They offer central functionality and are ready for production use." : "Aplikasi unggulan dikembangkan oleh dan dalam komunitas. Mereka menawarkan fungsionalitas sentral dan mereka siap dipakai untuk produksi.",
    "Featured" : "Unggulan",
    "Update to {update}" : "Perbarui ke {update}",
    "All ExApps are up-to-date." : "Semua ExApp sudah yang terbaru.",
    "Default Deploy daemon is not accessible" : "Deploy daemon default tidak dapat diakses",
    "Icon" : "Ikon",
    "Version" : "Versi",
    "Daemon" : "Daemon",
    "Level" : "Level",
    "Actions" : "Tindakan",
    "Results from other categories" : "Hasil dari kategori lainnya",
    "No apps found" : "Tidak ada aplikasi ditemukan",
    "_%n ExApp has an update available_::_%n apps have an update available_" : ["%n aplikasi memiliki pembaruan tersedia"],
    "_Update_::_Update all_" : ["Perbarui semua"],
    "Deploy Daemon" : "Deploy Daemon",
    "Type" : "tipe",
    "Display Name" : "Nama Tampilan",
    "GPUs support" : "Dukungan GPU",
    "Are you sure you want delete Deploy Daemon" : "Apakah Anda yakin ingin menghapus Daemon Deploy",
    "All ExApps on this daemon will be removed" : "Semua ExApp pada daemon ini akan dihapus",
    "All ExApps installed on this daemon will be removed" : "Semua ExApp yang diinstal pada daemon ini akan dihapus",
    "\"manual-install\" Deploy Daemon cannot be set as default" : "Daemon Deploy \"manual-install\" tidak dapat ditetapkan sebagai default",
    "Failed to save admin options. Check the logs" : "Gagal menyimpan opsi admin. Periksa log",
    "Deploy daemon config details" : "Detail konfigurasi daemon deploy",
    "Manual install daemon usually used for development. It cannot be set as default daemon." : "Daemon instalasi manual biasanya digunakan untuk pengembangan. Daemon ini tidak dapat ditetapkan sebagai daemon default.",
    "Deploy config" : "Konfigurasi deploy",
    "Verify connection" : "Verifikasi koneksi",
    "No Deploy daemons configured" : "Tidak ada Deploy daemon yang dikonfigurasi",
    "Register a custom one or setup from available templates" : "Daftarkan yang kustom atau siapkan dari template yang tersedia",
    "Register Daemon" : "Daftarkan Daemon",
    "AppAPI will try to install small skeleton ExApp to verify Daemon configured correctly and deployment steps are passing." : "AppAPI akan mencoba menginstal ExApp kerangka kecil untuk memverifikasi bahwa Daemon dikonfigurasi dengan benar dan langkah-langkah deployment berhasil.",
    "The following Deploy test checks must be passed to succeed:" : "Pemeriksaan uji Deploy berikut harus lolos agar berhasil:",
    "More info" : "Info lebih lanjut",
    "Remove test ExApp" : "Hapus ExApp uji",
    "Start Deploy test" : "Mulai uji Deploy",
    "Stop Deploy test" : "Hentikan uji Deploy",
    "ExApp is unregistered and container is removed on \"Stop deploy test\"" : "ExApp akan dibatalkan pendaftarannya dan kontainernya dihapus saat \"Hentikan uji deploy\"",
    "Hostname to access ExApps" : "Nama host untuk mengakses ExApps",
    "Hostname or path to access Docker daemon (e.g. nextcloud-appapi-dsp:2375, /var/run/docker.sock)" : "Nama host atau path untuk mengakses daemon Docker (misalnya nextcloud-appapi-dsp:2375, /var/run/docker.sock)",
    "Daemon with this name already exists" : "Daemon dengan nama ini sudah ada",
    "Password must be at least 12 characters long" : "Kata sandi harus terdiri dari minimal 12 karakter",
    "With https enabled network is set to host" : "Dengan https diaktifkan, jaringan disetel ke host",
    "Changes would be applied only for newly installed ExApps. For existing ExApps, Docker containers should be recreated." : "Perubahan akan diterapkan hanya untuk ExApp yang baru diinstal. Untuk ExApp yang sudah ada, kontainer Docker harus dibuat ulang.",
    "URL should start with http:// or https://" : "URL harus diawali dengan http:// atau https://",
    "For HTTPS daemon, Nextcloud URL should be HTTPS" : "Untuk daemon HTTPS, URL Nextcloud harus HTTPS",
    "All available GPU devices on daemon host will be requested to be enabled in ExApp containers by Docker." : "Semua perangkat GPU yang tersedia di host daemon akan diminta untuk diaktifkan pada kontainer ExApp oleh Docker.",
    "Edit Deploy Daemon" : "Edit Daemon Deploy",
    "Register Deploy Daemon" : "Daftarkan Daemon Deploy",
    "Select daemon configuration template" : "Pilih templat konfigurasi daemon",
    "Unique Deploy Daemon Name" : "Nama Daemon Deploy Unik",
    "Select daemon deploy method" : "Pilih metode deploy daemon",
    "Set daemon as default" : "Tetapkan daemon sebagai default",
    "Set as default daemon" : "Tetapkan sebagai daemon default",
    "Enable https" : "Aktifkan https",
    "Show deploy config" : "Tampilkan konfigurasi deploy",
    "Hide deploy config" : "Sembunyikan konfigurasi deploy",
    "Network" : "Jaringan",
    "Docker network name" : "Nama jaringan Docker",
    "Additional option" : "Opsi tambahan",
    "by {author}\n{license}" : "oleh {author}\n{license}",
    "Your apps" : "Aplikasi Anda",
    "Documentation" : "Dokumentasi",
    "Details" : "Detail",
    "Changelog" : "Log pembaruan",
    "Active apps" : "Aplikasi aktif",
    "Disabled apps" : "Matikan Aplikasi",
    "Updates" : "Pembaruan",
    "Featured apps" : "Aplikasi yang difiturkan",
    "Supported apps" : "Aplikasi yang didukung",
    "manual-install apps cannot be updated" : "aplikasi manual-install tidak dapat diperbarui",
    "{progress}% Deploying" : "{progress}% Sedang dideploy",
    "{progress}% Initializing" : "{progress}% Sedang diinisialisasi",
    "Healthchecking" : "Pemeriksaan kesehatan",
    "Deploy and Enable" : "Deploy dan Aktifkan",
    "Enable" : "Aktifkan",
    "Disable" : "Nonaktifkan",
    "Allow untested app" : "Izinkan aplikasi yang belum diuji",
    "Default Deploy daemon is not accessible. Please verify configuration" : "Daemon Deploy default tidak dapat diakses. Silakan verifikasi konfigurasi",
    "The app will be downloaded from the App Store and deployed on default Deploy Daemon" : "Aplikasi akan diunduh dari App Store dan dideploy pada Daemon Deploy default",
    "This app is not marked as compatible with your Nextcloud version. If you continue you will still be able to install the app. Note that the app might not work as expected." : "Aplikasi ini tidak ditandai sebagai versi Nextcloud Anda yang kompatibel. Jika Anda tetap ingin melanjutkannya, Anda tetap dapat memasang aplikasi. Catatan bahwa aplikasinya mungkin tidak akan berjalan seperti yang diharapkan.",
    "Your ExApps" : "ExApp Anda",
    "An error occurred during the request. Unable to proceed." : "Terjadi kesalahan selama permintaan. Tidak dapat melanjutkan.",
    "The app has been enabled but needs to be updated." : "Aplikasi telah diaktifkan tetapi perlu diperbarui.",
    "Error: This app cannot be enabled because it makes the server unstable" : "Kesalahan: Aplikasi ini tidak dapat diaktifkan karena membuat server tidak stabil",
    "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n\n### List of applications that require AppAPI:\n\n- [talk_bot_ai_example](https://github.com/cloud-py-api/talk_bot_ai_example)\n- [upscaler_example](https://github.com/cloud-py-api/upscaler_example)\n- [image_to_text_example](https://github.com/cloud-py-api/file_to_text_example)\n- [ai_image_generator_bot](https://github.com/cloud-py-api/ai_image_generator_bot)\n- [SummarAI](https://github.com/nextcloud/sumupbot)\n\n_If you wish to develop an application, we will gladly help and assist you._\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*" : "### Tingkatkan Nextcloud Anda dengan AppAPI dan aplikasi yang dirancang khusus.\n\n\nAppAPI adalah proyek dalam ekosistem Nextcloud yang dirancang untuk merampingkan dan meningkatkan proses\npengembangan, deployment, dan pengelolaan aplikasi.\n\nAppAPI memperkenalkan metodologi baru yang memungkinkan pengembang membuat\naplikasi menggunakan berbagai bahasa pemrograman, tidak terbatas pada PHP, yang secara tradisional digunakan dalam pengembangan Nextcloud.\n\n\n### Daftar aplikasi yang memerlukan AppAPI:\n\n- [talk_bot_ai_example](https://github.com/cloud-py-api/talk_bot_ai_example)\n- [upscaler_example](https://github.com/cloud-py-api/upscaler_example)\n- [image_to_text_example](https://github.com/cloud-py-api/file_to_text_example)\n- [ai_image_generator_bot](https://github.com/cloud-py-api/ai_image_generator_bot)\n- [SummarAI](https://github.com/nextcloud/sumupbot)\n\n_Jika Anda ingin mengembangkan aplikasi, kami dengan senang hati akan membantu dan mendampingi Anda._\n\n### Dukungan\n\nKami menghargai dukungan apa pun untuk proyek ini:\n\n- ⭐ Beri bintang pekerjaan kami di GitHub\n- ❗ Buat Issue atau permintaan fitur\n- 💁 Selesaikan Issue dan buat Pull Request\n- 🧑‍💻 Kembangkan aplikasi Anda sendiri menggunakan AppAPI\n\nKami sungguh antusias dengan masa depan proyek AppAPI dan potensinya untuk mentransformasi\ncara aplikasi dikembangkan dan dialami dalam Nextcloud.\n\nSaat kami memulai perjalanan ini, kami mengundang Anda dengan hangat - para pengembang, pemikir, kreator, dan visioner -\nuntuk bergabung bersama kami dalam membentuk lanskap aplikasi yang lebih serbaguna, stabil, dan aman.\n\n*Wawasan, saran, dan kontribusi Anda sangat berharga bagi kami.*"
},"pluralForm" :"nplurals=1; plural=0;"
}